1
No tools required for assembly.
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
•
Assemble the item as close to the position (in
the same room) as possible.
•
Assemble on a soft level surface to avoid
damage to the item.
•
Part of the assembly maybe easy with two
people.
•
Use only the tools as shown below.
•
Do not dispose of packaging until the
assembly is complete.
•
Dispose of all packaging carefully and
responsibly at your local recycling plant.
Care and maintenance
•
More stubborn marks can be
removed using a damp (not wet)
cloth. Wipe the item dry using a lint
free cloth.
•
DO NOT use detergents, abrasive
cleaning products or cleaning
products that contain ammonia,
solvents or silicone as these may
damage the surface of the item.
•
Regulary check that there are no
lose screws on the light fitting and
plug.
•
Always disconnect power supply when
servicing or cleaning.
•
Use a duster to reach even the most
difficult of spaces.
•
It it’s been a while since you’ve dusted
your lights, consider wearing a mask to
protect your mouth and nose.
•
After wiping down the dirt, dust and
any residue left behind, check for
damage, broken or missing pieces.
•
Check you have all the components and
tools listed on page 2.
•
Remove all fittings from the bag and
separate them into their groups.
•
Keep children and animals away from the
work area. Small could parts/components
could choke if swallowed.
•
Make sure you have enough space to
layout the parts before commencing with
the assembly.
•
Do not stand or put weight on to the item.
This potentially could cause damage.
Tools Required. Not supplied.
