Section 1: Horizontal Fuselage
Installation
Step1. Install a 700mm (27.6-inch) to the pre-cut
slot in the front horizontal fuselage.
Step2. Apply some thin CA to secure the carbon
fiber square tube to the fuselage.
Step3. With the front horizontal fuselage on a flat
surface, slide the rear horizontal fuselage in
position. Use a straight edge to check the
alignment of two pieces, aligning the holes in
center of each.
Use foam-safe CA to glue the two pieces together.
Step4. Use foam-safe CA to glue two 300mm
(11.8-inch) carbon fiber strip to the horizontal
fuselage.
Section 2: Airframe Assembly
Step1. Slide the vertical fuselage into the horizontal
fuselage. Align the tabs from the vertical fuselage into
the slots in the horizontal fuselage.
Adjust the vertical fuselage to make it in the center
line of the horizontal fuselage.
Step2.
Use a square and foam safe CA to glue the
vertical fuselage and horizontal fuselage pieces
together. Start at the front and slowly work your way
toward the rear of the fuselage, gluing small sections
at a time.
