4
Cut off the excess part of the control horn with a knife.
Then secure the control horn on the pre-cut slot of
the
elevator with the CA glue.
Secure the servo onto the servo plates
.
Cut off the unnecessary part of the Z-bend wire.
Locate the following parts:
1 x Cabin cover
1 x
Velcro strip
1 x 2212 motor
(
Not included
)
1 x 30A ESC
(
Not included
)
1 x Battery
(
Not included
)
1 x 1047 prop
(
Not included
)
We recommend folding props for best results.
Secure your motor on the fuselage. You might need to
add plywood blocks to make the motor mount higher
if your motor is too short to clear the cowling.
