Step 6: Adjust the horizontal stab so it’s perfectly level and perfectly centered.
Step 7: You will use 8 hinges to secure the aileron to the wing, 4 hinges per aileron half. Apply CA to secure.
Step 8: Find the control horn, pushrod, control horn bolts, and pushrod easy-connectors. Assemble the
control horn as shown below. Install the control horn and pushrod for the aileron, rudder and elevator servos.
For the aileron servos, you will need to create 2 small opening on the wing to connect your Y-harness. We
recommend using micro servos. Due to small variations in servo sizes, you might need to make minor
adjustments to the servo opening with an exacto-knife to accommodate your servo.
