With the power shuttle, you can change the driving direction without using the
clutch pedal. However, traditional use of the clutch pedal is still possible when
changing direction, just make sure that you press the pedal fully down before
moving the power shuttle lever.
•
With the power shuttle lever in the centre position, the parking brake can be
applied.
•
When applying the parking brake, the four-wheel drive (4WD) is engaged and
all wheels brake.
•
When the power is turned off, the parking brake is automatically applied
independently of the power shuttle lever position.
3.2.13
Using the main switch
IMPORTANT: The main power can be switched off only when the ignition key is
in the STOP position.
1
GUID-80ABD553-4F90-46C9-B3FA-D951E7ADBB67
1. Main switch
The main switch is spring returned on both sides.
•
To switch on the main power, press the symbol side of the main switch.
•
To switch off the main power, press the side of the main switch opposite to
the symbol.
When the main power is switched off, power is supplied only to the radio and
instrumentation.
•
To switch off the main switch in an emergency, follow the steps below.
•
Switch off the main power by turning the ignition key to the STOP position.
•
Press the side of the main switch opposite to the symbol and,
simultaneously, the symbol side of the instrument panel display change-
over switch.
3.2.14
Control stop
The control stop is used when the tractor is running an implement in stationary
mode (for example a compressor or pump) and the operator is not in the cab.
Using the control stop reduces the risk of more serious damage to the engine or
in the transmission. The control stop is extra equipment.
3. Operation
- 65 -
