2
1
AUTO
AUTO
MIN
MAX
P
GUID-822D12F8-B9E9-40EC-B1C6-8E8E6AD8EC22
1. Automatic traction control switch
2. Automatic traction control symbol
1. Apply the parking brake.
2. Press the symbol side of the automatic traction control switch and release it.
The automatic traction control is engaged in standby mode (but not in function).
The automatic traction control symbol flashes on the tractor terminal display
and A-pillar display.
3. Select the driving direction.
The selected direction does not engage and the direction arrow remains
flashing until the traction is engaged.
4. Raise the engine speed to over 1020 rpm to engage the traction.
When the traction is engaged, the arrow of the selected direction and the
automatic traction control symbol stops flashing and is lit continuously.
If the clutch pedal is pressed down when the traction engagement starts, the
traction engages in accordance with the clutch pedal position.
5. To release the traction, press the brake pedal or lower the engine speed so
that it is under 980 rpm.
The traction is always released regardless of the position of the clutch pedal.
6. To switch off the automatic traction control, press the side of the switch
opposite to the symbol.
The selected direction does not engage, and the direction arrow remains
flashing until the power shuttle lever has been moved to the parking brake
position and the direction has been engaged again.
After starting the engine, the automatic traction control must be activated again.
3. Operation
- 114 -
