22
Revision D November 2022
Determine Backup and Transition Type
Note:
The drawing package supplied with the QuadGuard
®
HS must be used with these
instructions for proper assembly and should take precedence over these general instructions.
Determine Backup and Transition Type
The QuadGuard
®
HS is available with a Tension Strut Backup or a Concrete Backup.
Refer to Figures 7 and 8, along with the Backup Assembly drawing, to determine which
type of Backup is assembled.
Figure 7
Tension Strut Backup
Figure 8
Concrete Backup
610 mm [24”]
760 mm [30”]
915 mm [36”]
1755 mm [69”]
2285 mm [90”]
610 mm [24”]
760 mm [30”]
915 mm [36”]
WIDTH VARIES
