Service and Installation Manual
For warranty service, call 1-888-VALPRO8 / 1-813-502-030
6
Technical Information
Model
VPIM420
VPIM1000
Electrical input
115VAC ~ 60Hz
230VAC ~ 60Hz
Power consumption
2.4kW
·
h /100 lbs of ice
5.6kW
·
h /100 lbs of ice
Ice-making rated current
13.8A
13.6A
Ice-harvest rated current
15.8A
10.8A
Refrigerant
R404A, 30.3 oz.
R404A, 52.9 oz.
High Side Pressure
340psig
464psig
Low Side Pressure
180psig
180psig
Width x Depth x Height
30" X 25" X 22 7/16"
30" X 25" X 27 3/4"
Unit weight
135 lbs
227 lbs
Ice-making capability
420lbs/day*
1000lbs/day*
*The actual quantity of ice produced per day can vary with room and water
conditions.
The technical data and performance index listed above should be used for
reference only. They are subject to change.
This product has been tested and certified to NSF standard 12 by INTERTEK.
Service and Installation Manual
23
For warranty service, call 1-888-VALPRO8 / 1-813-502-030
Control Panel
(located at top of right side panel)
The control panel includes three buttons and six indicator lights.
IMPORTANT:
•
If you use a water filter and have already set the initial data of water filter,
under any working status, the cleaning recommended indicator light will be
on.
•
If you do not use a water filter, you needn’t set the initial data of water filter,
and the cleaning recommended indicator light will be off under any working
status.
Operation of the control panel:
1.
When the unit is plugged in, the standby indicator light is on. Ice machine
is in the Stand-by mode.
2.
During the Stand-by mode, press the ICE button more than 3 seconds, all
indicator lights are on (except cleaning recommended indicator light),
water enter the water tank. Then ice machine will start to make ice
automatically, the ice making indicator will be on.
3.
During harvesting, the ice harvest indicator light is on and the ice making
indicator is off. When the ice storage bin is full, the bin full indicator is on.
4.
If the CLEAN button is pressed during the ice making mode, it will be
ignored. The ice-making will continue.
5.
When you want to clean the machine, make sure the ice machine is in
Stand-by mode. Press the CLEAN button more than 3 seconds and the ice
machine will start the cleaning mode, the clean cycle indicator will be on.
After 60 minutes, the cleaning mode stops and the standby indicator light is
Summary of Contents for VPIM-420
Page 2: ......
