START USING WIRELESS AUDIO RECEIVER
1) Charging the wireless audio receiver
Connect your wireless audio receiver to the USB adaptor using the provided charging cable.
The red LED light will switch on when charging.
2) Power On/Off
a) To power on, press and hold the Power button for 3 seconds until LED flashes blue and red.
b) To power off, press and hold the Power button for 3 seconds. LED will be switched off.
c) If the device is inactive for 5 minutes, it will automatically power off.
3) Connecting audio device
a) Connect a wired earphone by inserting the 3.5mm jack to the device’s audio output port.
b) Connect the speaker or car audio by inserting the 3.5mm jack connector and one end to
the device and the other end to an audio player.
4) Pairing
Step 1: Activate Bluetooth function on your mobile device to begin pairing.
Step 2: Power on the device by long pressing the Power button till the LED indicator
flashes blue and red.
Step 3: Connect to the device by selecting ‘Valore SA01’ under the device list.
Step 4: Once connected, the LED light at the will be solid blue.
If the pairing is not successful, please turn off wireless audio receiver first, and then re-pair again. After pairing is
successful, paired devices will remember each other. Unless pairing information is deleted because of new
pairing, no need to pair when using the next time.
If you want to pair the wireless audio receiver with other devices, please turn off Bluetooth function of existing
source device, and pair the wireless audio receiver with the new device according to steps 1-4 mentioned above.
5) Controls
a) Short press the Power button / Calling hands free to play/pause music and answer call.
Long press to reject calls.
b) Short press / Next to increase volume. Long press for next song.
c) Short press Volume - / Previous to decrease volume. Long press for previous song.
6) Language
a) The default language is English. On standby mode, double press Power button / Calling
hands free to change language.
