START USING THE WIRELESS HEADSET
1) Charging the headset (1.0A USB adapter to wall plug)
Make sure that the wireless headset is turned off before charging. Plug the micro USB cable
into the charging port located at the bottom right side of the Bluetooth headset and connect it
to a USB adapter (1.0A) to a wall plug. A orange LED indicator will turn on when the headset
is charging. The orange LED indicator will switch to blue when headset is fully charged. To
fully charge the headset, it will require at least 2 hours.
Note:
Please charge the headset for at least 4 hours before first use. Please make sure that the headset is
switched off when charging is in progress.
2) Pairing and connecting (switched off)
Step 1: Press and hold the On/Off button of the headset until the LED light flashes
orange and blue rapidly.
Step 2: Activate Bluetooth function on your mobile device to begin pairing with headset.
Step 3: Connect to the headset by selecting ‘Valore M12’ under the device list.
(If prompted to enter a pin-code, enter ‘0000’)
Step 4: Once connected, the LED light will indicate Blue and flashes slowly.
Note: If the pairing is not successful, please turn off wireless headset first and then re-pair again. After pairing
is successful, paired devices will remember each other. Unless pairing information is deleted because of new
pairing, no need to pair when using the next time.
If you want to pair the wireless headset with other devices, please turn off Bluetooth function of existing source
device, and pair the wireless headset with the new device according to steps 1-4 mentioned above.
3) Re-pairing the wireless headset
Each time the wireless headset is turned on, it will attempt to connect to the last device it was
paired with automatically (mobile device with Bluetooth function turned on).
The wireless headset will do as follows:
1. Connect to last connected devices automatically;
2. Be listed in the screen of devices as an output channel. Select ‘Valore M12’ as the
output channel to play music.
Note: In some cases, the headset may need to be manually selected from your operating system sound or
hardware output list.