START USING THE WIRELESS EARPHONES
1) Charging the wireless earphones
Connect the USB charging cable to the earphones located on the side of the left side.
When charging, the LED indicator is red and the red light will go off when fully charged.
Note:
1. Recommended to charge earphones before first use.
2. Earphones cannot be use while charging.
3. If not in use for a long time, it is recommended to charge once a month to
maintain battery life.
4. The earphones will automatically shut down if it is not connect to the device
for more than 5 minutes.
2) Pairing the wireless earphones (switched off)
Step 1: Activate Bluetooth function on your mobile device to begin pairing with earphones.
Step 2: Press and hold onto the Power button (Right button) until the LED light flickers
red and blue.
Step 3: Connect to the headphones by selecting ‘Valore BTS31’ under the device list.
Step 4: Once connected, the LED light at the Bluetooth button will blink blue in
interval of 5 seconds.
Note: If the pairing is not successful, please turn off wireless headset first, and then re-pair again. After pairing
is successful, paired devices will remember each other. Unless pairing information is deleted because of new
pairing, no need to pair when using the next time.
If you want to pair the wireless headset with other devices, please turn off Bluetooth function of existing source
device, and pair the wireless headset with the new device according to steps 1-4 mentioned above.
