START USING THE POWER BANK WIRELESS SPEAKER
1) Charging the power bank wireless speaker
Open the rubber cover, connect the Micro-USB port with the recharge cord and its USB plug
to an USB port power source. The 4 LED lights will light up and flash to indicate recharging of
the power bank wireless speaker. When it is fully charge, all 4 LEDs will stop flashing and stay
lit.
Noted: It take approx. 5~8 hours for every recharge. During recharging you cannot use the standard USB port
for output charging at the same time.
2) Checking your power bank battery level
Open the rubber cover, press the charger switch once to turn on level checking.
4 LEDs are lit - 90% - 100%
3 LEDs are lit - 60% - 90%
2 LEDs are lit - 30% - 60%
1 LED is lit and flashing - 10% - 20%
If power bank is less than 10%, it will turn off automatically.
3) Charging your device
Open the rubber cover, connect the charging cord (not provided) to the standard USB port of
the power bank. Connect the other end to your smart phone device. Press the charger switch
once to turn on the power bank and the output leds will lit continuously to indicate charging of
your device. If the power bank do not detect output loading in approx. 30secs, it will turn off
automatically. You then need to repeat the above steps to turn on the power bank again before
you can charge your devices.
