20
Installation Planning
Installer—READ THIS FIRST
1. YOU NEED TO KNOW FROM THE
HOMEOWNER:
- The height of the floor or hearth finish;
- The thickness and type of the wall finish
around the firebox opening;
- What accessories (trim, decorative lighting,
remote control wall switch, etc.) will be
installed with this fireplace;
- The venting configuration.
2. Unpack the appliance.
3. Check that you have everything.
4. Finish the framing.
5. If you are using the 1376CSK Clean Surround
Installation Kit, install it now.
6. Fit the appliance into framing.
7. Fix the appliance to the framing.
8. Install the venting system.
9. Position the restrictor.
10. Connect and test the gas supply.
11. Install the ceramic liners, fuel bed and rocks.
12. Refit the window.
13. Connect the electrical wiring for optional decorative
light if used.
14. Install the optional wall switch if required.
15. Put the batteries in receiver and remote control
handset.
16. Initialize the remote control system.
Tools and supplies required
• Packing knife
• Claw hammer
• Screwdriver set
• Metric socket set
• Pliers
• Adjustable Wrench
• Sealant
• Dish soap/water solution
• Gloves
• Eye Protection
• Electrical outlet box, wire, wire clamp and switch if
installing optional decorative light
17. Verify the operation and adjust aeration settings.
18. Install the remote control handset wall holder.
19. Instruct the homeowner on the operation and
maintenance of the fireplace.
20. Install the Trim Kit if required.
21. Finish the wall around the fireplace.
10”
10”
3” Inlet & Exhaust
Collars
7-5/8” dia.
collar
559FSK Flashing Kit
559CLT Co-Linear Terminal
Alternate to 559CLT/559FSK Conversion
Terminal Cap
Co-Linear to Co-Axial
Adapter
Co-Linear Venting
Flashing
Co-linear terminal configurations
