REFITTING CERAMICS
Both models
1.
Fit the burner tray trim over the front rim of the
burner tray. Push the trim fully down. See figure 2.
Fitting Coals to models supplied with a Coal Ceramic Fuel Effect.
(For models supplied with a Pebble Ceramic fuel effect see section headed ‘Fitting
Pebbles to models supplied with Pebble Ceramic Fuel Effect’).
1.
Place the rear base coal in the firebox. It should rest on the ledges at the sides and
back of the firebox and its rear face should
touch the rear ceramic wall. See figure 3.
Page 7
OWNER GUIDE
Figure 2. Burner Tray Trim
Figure 3. Rear Base Coal Position
