Valor PORTRAIT 536CXBI Installation Manual Download Page 1

1

Applications

The President Cast Front for Insert 536CXBI is intended 

to install on the Valor Portrait 530 heater when installed 

as an insert fireplace. 
The Valor model 530 heater with the 536CXBI President 

Cast Front and 582 or 583 Closure Plate comes ready 

for installation as an insert unit into existing solid-fuel 

burning fireplaces provided space and local codes 

permit.

©2020, Miles Industries Ltd.

4005304-06

Note: This kit must be installed or serviced by a qualified 

installer, service agency or gas supplier. These instructions 

are to be used in conjunction with the main installation 

instructions for the above listed heater model.

President Cast Front Insert Model 536CXBI

Approved for use with 

Valor heater models 530 & 530 insert only

HOT GLASS

 WILL 

CAUSE BURNS.

DO NOT TOUCH 

GLASS 

UNTIL COOLED.

NEVER 

ALLOW CHILDREN 

TO TOUCH GLASS.

DANGER

!

A barrier designed to reduce the risk of burns from the hot 
viewing glass is provided with this appliance and must be 
installed for the protection of children and other at-risk 
individuals.

INSTALLER: Leave this 

manual with the appliance.
CONSUMER: Retain this 

manual for future reference.

INSTALLATION MANUAL

Portrait

Requires the use of a 582CPB or 583CPB Closure Plate 

(sold seperately)

WARNING

If the information in these 

instructions is not followed 

exactly, a fire or explosion 

may result causing property 

damage, personal injury or 

loss of life.

Summary of Contents for PORTRAIT 536CXBI















Reviews: