15
Cleaning your fireplace
WARNING
The window unit must be correctly
installed, fastened and sealed after
servicing or serious bodily injury and/or
damage to the appliance may result.
To ensure a safe operation:
• Double-check that the window frame is
correctly installed;
• Verify that the bolts and spring-loaded
bolts are hooked properly to the window
tabs then;
• Pull out the top of the window and
release it to ensure the springs return it;
repeat with the bottom of the window;
• Ensure the window is sealed to the
firebox before operation.
WARNING
Failure to install the window correctly
can:
• Leak carbon monoxide;
• Affect the performance of the fireplace;
• Damage components;
• Cause overheating resulting in
dangerous conditions.
Damages caused by incorrect window
installation is not covered by the Valor
warranty.
Re
fi
t and Check Window
1. Place window over the
fi
rebox.
2. While holding it, push in and screw the bottom two
bolts to secure them.
3. Insert the top two bolts pins into the slot/holes
and turn them 90 degrees to secure them.
4. Pull the top of the window forward and release to
check that it opens slightly and returns con
fi
rming
the good function of the spring-loaded mecha-
nism.
5. Similarly, check the bottom of the window by pull-
ing it forward and releasing it.
6. Apply
fi
rm pressure around the window frame
to ensure the window is sealed tight against the
fi
rebox.
7.
If the Hot Glass Warning plate has been removed
from the front lower corner of the window,
reinstall it by sliding it between the glass and the
frame as indicated.
8. Re-install the barrier screen on the trim.
Safety warning plate
WARNING
For safety purposes, make sure the
barrier screen is re-installed on the
fi
replace front after maintenance.
90
°
