Valor GV60BRK Installation And Operation Manual Download Page 1

1

March 2021

One-Hour Shutdown Feature

The handset GV60BRK offers the same functionality as 

the regular thermostatic handset for the Valor GV60 

PLUS remote control 

except that the automatic shutdown 

feature is one hour instead of eight hours.

*NOTE: The handset GV60BRK can be used ONLY on 

receivers having the letters GW and newer next to the 

date code (G6R-R3AM, silver foil labelled receivers).

The one-hour feature handset will allow the fireplace 

to turn down to pilot one hour after the last flame 

adjustment is made regardless of which mode is used to 

adjust the flame.
The fireplace will also turn to pilot after one hour if the 

handset loses communication with the receiver or if it is 

out of range.

Synchronize Remote Control 

The receiver and the handset of the remote control sys-

tem must be initially synchronized before the first use.
1.  Insert alkaline batteries in the remote control 

battery holder and handset. The battery holder is 

located beside the receiver, near the control valve 

under the firebox, left of the firebox or beside the 

wall switch.

2.  With a sharp object, press and hold the receiver’s 

reset button until you hear one short and one long 

beeps. Release the reset button after the second 

beep.

For use with Valor GV60 PLUS Remote Control Systems ONLY*

3.  Within the subsequent 20 

seconds, press the small flame 

button ( ) on the remote 

handset until you hear two 

short beeps confirming the 

sychronization is set. If you 

hear one long beep, this 

indicates the code learning 

sequence has failed or the 

wiring is incorrect.

This is a one time setting only and is not required when 

changing the batteries in the remote receiver. 

The remote control system is now ready to use.

•  Once synchronized with a receiver, the handset does 

not need to be in the room or in use to maintain the 

one-hour shutdown feature.

•  The one-hour feature is maintained when using a 

1265WSK or RBWSK wall switch.

•  One handset can be used to synchronize multiple 

receivers to activate the one-hour feature.

•  Synchronizing the receiver again with a regular 

handset will cancel the one-hour shutdown feature.

Not
“Pl
or n

On
hou
aut

The 1-hour handset is identi

fi

 ed as a 

Valor PLUS 1-HR FEATURE

G6R-R3AM, 

GW

4003043-06

GV60BRK

1-Hour Shutdown Kit

INSTALLATION and OPERATION MANUAL

Summary of Contents for GV60BRK











Reviews: