1
Note: This kit must be installed or serviced
by a qualified installer, service agency
or gas supplier. These instructions are
to be used in conjunction with the main
installation instructions for the above
listed models.
Overview
The 720SWK-M2 Sidewall Co-Linear Terminal Kit allow
approved Valor units listed above only to be vented us-
ing approved 3-inch flexible vent liners to penetrate an
existing masonry solid-fuel burning fireplace and con-
nect to 720SWK-M2 horizontal termination rather than a
vertical termination at the top of the chimney.
Use of this kit requires the vent collar slider plate to be
replaced with a vent slider plate having no restrictor
(4002287), supplied with this kit except where more
than 10’-0” vertical vent run.
Kit Contents
• Sidewall
terminal
• Vent slider plate with NO restrictor 4002287
4008049-01
© 2020, Miles Industries Ltd. All rights reserved.
720SWK-M2 Sidewall Co-Linear Terminal Kit
Use with Valor models 700M and 780M Fireplaces ONLY
INSTALLATION INSTRUCTIONS
G3.5/G4
WARNING
If these instructions are not followed
exactlly, a fire or explosion may result
causing property damage, personal
injury or loss of life.
Please leave this manual with the homeowner.
Sidewall terminal
Front
Vent slider plate with NO
restrictor 4002287
Rear
12”
12”
8-1/2”
3”
intake
3”
exhaust
Kit content
