OWNER’S GUIDE
Page 8
Figure 5 Front Base Coal
Position
Figure 4 Rear Base Coal Position
Figure 3 Burner Tray Trim
Figure 2 Ceramic Rear Wall
Position
REFITTING COALS
1
.
Fit the ceramic rear wall into the bracket at the back of the firebox .See figure 2.
2.
Fit the burner tray trim over the front rim of the burner tray. Push the trim fully down.
See figure 3.
3
.
Place the rear base coal in the firebox. It should
rest on the ledges at the sides and back of the firebox and
its rear face should touch the rear ceramic wall. See
figure 4.
4
.
Place the front
base coal in the
firebox with its
bottom front locating
over the front rim of
the firebox. Pull the
coal forward so that
it locates
immediately behind
the front rim of the
firebox. See figure 5.
5.
There are two
types of loose coals.
These are identified
with the letter “A” or
“B” on the underside
of the coal.
There are three “A”
coals and two “B”
coals.
