4
Place two coals each side of the centre
loose coal. Make sure that they bridge the
space between the front and rear base
coals. See figure 6.
5
Place a loose coal behind the central coal
in the front row central and resting on the
two peaks of the rear base coal. See figure 7.
6
Place two coals each side of the centre
loose coal and immediately behind the
front row of coals. See figure 8.
7
Place two of the remaining coals each side
of the central peak at the rear of the base
coal and immediately behind the second
row of coals. See figure 9.
1
Place the front base coal in the burner
compartment so that it rests on the
edges at the sides and front. Pull the coal
forward so that it is immediately behind
the front rim of the burner compartment.
See figure 3.
2
Place the rear base coal in the burner
compartment behind the front coal. It
should rest on the ledge at the back of the
burner compartment. The projections at
the sides of the rear coal should touch
the front coal. See figure 4.
3
Place one of the loose coals from the bag
in the centre of the front base coal. Make
sure that it bridges the space between the
front and rear base coals. See figure 5.
Page 7
3. FITTING THE CERAMIC COALS
figure 3
Front base coal
figure 5
First loose caol
figure 4
Rear base caol
figure 6
figure 9
figure 7
figure 8
USERS INSTRUCTIONS
Valor 600B610_01 7/12/00 3:23 PM Page 22
