2
Installation
The GE4CIK allows wall finish to be brought up to the
fireplace’s opening.
1. Install the lower panel securing it to the appliance’s
underside with 3 screws supplied.
2. On the right hand side of
the appliance, loosen the
top screw closest to the
front edge and the screw
closest to the bottom as
indicated.
3. Identify the right hand
side panel from the
image below.
Bottom
Top
RS panel
LS panel
4. Slide the side panel under the loosened screws.
Lightly tighten the screws to hold the panel. Repeat
on the left side of the appliance.
5. Place the top panel on the top of the appliance and
secure with 3 screws supplied.
6. Tighten the side panels’ screws adjusting them so all
panels front surfaces are flush with each other.
7. Insert the appliance into framing and secure on
each side with 8 wood screws (not supplied).
Appliance’s
right side view
Designed and Manufactured by / for Miles Industries Ltd.
190 – 2255 Dollarton Highway, North Vancouver, B.C., CANADA V7H 3B1
Tel. 604-984-3496 Fax 604-984-0246
www.valor
fi
replaces.com
Because our policy is one of constant development and improvement, details may vary slightly from those given in this publication.