4001901-05
Note:
These surrounds must be installed by a qualifi ed installer, service agency or gas supplier.
These instructions are to be used in conjunction with the main installation
757 4-Sided Square Trim Kit
INSTALLATION INSTRUCTIONS
Use
only
with
Valor Heater Models 738, 739 or RF24XB when fi tted in a RA24ZC
© Copyright Miles Industries Ltd., 2011.
The 757 Four-Sided Square Trim
Kit is intended to be used on any
Valor Legend G3 models 738 or 739
heaters or on a Retrofi re RF24XB
installed in a RA24ZC fi tted with any
inner front kits.
Installation of the Square Trim does
not aff ect clearances*, framing
dimensions, or other specifi cations
listed in the heater installation
manual. *
However, mantel
clearances are referenced from
the bottom of the heater, not the
bottom of the trim
—see installation
manual packed with the heater.
757 Square Trim shown with optional
744FVI FenderFire Single Door Front
(Other fronts are available)
L
EGEND
G3
Overview
757 Square Trim
2”
4”
Bottom
of heater
4”
37-1/2”
31-1/8”
738 or 739 heater
or RF24XB heater
installed in a RA24ZC
