Valor 650JN, Homeowner'S Manual, Page: 9 / 26

9
Operating your fireplace
ON:
parallel
to pipe
OFF:
perpendicular
to pipe
Fireplace control devices
There are two ways to control your fi replace.
1. Thermostatic Remote Control: Turns fi re ON, OFF,
controls fl ame height and can be programmed to
function automatically.
2. Wall Switch: Turns fi re ON, OFF and controls fl ame
height.
Turn your fi replace ON
Press and hold:
- + buttons on remote, or
- ON-OFF button on wall switch
until a short beep con fi rms the start sequence has
begun; release buttons.
Continuing beeps con fi rm the ignition is in process.
The pilot lights up, then the fi replace.
If you need to light up the pilot manually, see the
Lighting Instructions card attached to the fi replace -
see page 7 to know how to access it. Also, a copy of
this card is reproduced in Appendix A of the fi replace
Installation Manual.
Turn your fi replace OFF (including pilot)
Press and hold:
- button on remote, or
- ON-OFF button on wall switch
If the fl ames are on, they go down and you hear the
valve motor wind down. You hear a clunk and a beep
indicating that the valve has received the signal from
the remote control.
In the unlikely event that you cannot turn o
ff your
fi replace with the remote control handset, use the
wall switch; if the wall switch malfunctions and
will not turn o ff the fi replace, wait 8 hours and the
fi replace will automatically go to pilot. You can then
access the controls inside your fi replace.
Alternately, turn o ff your house gas supply. In all
cases, call your dealer for service assistance.
Remote Control Wall Switch
To use additional functions of your Remote
Control such as temperature or program
settings, visit valor fi replaces.com/remotes
WARNING
Risk of severe burns! Surface of the
fi replace are very hot during operation!
Ensure fi repace has cooled o ff before
accessing control.
WARNING
STOP IF YOU SMELL GAS! DO NOT LIGHT!
See cover page immediately!