29
8.10.
Attaching Top Insulation
Layers –ZC Models only
1.
For top vent outlet appliances cut out a
circle at the center of the insulation layers
for the vent collar.
2.
Place both the insulation layers on top
of the appliance case inboard of the stand-
off spacers. See figure 50.
!Warning: Failure to install both the
insulation layers may cause a fire hazard
and voids warranty.
8.11.
Appliance Wall or Floor Fixing – President FS only
The President FS can be secured to the wall and/or floor if required. The fixing positions are shown in figure 4. Holes should
be drilled in the wall or floor and the holes plugged at this stage. Position the appliance accurately in its final location. Mark
through the two fixing holes in the appliance base and/or the holes near the top corners at the back. Plug the holes if
necessary. Don’t fix the appliance at this stage. Wait until the vent pipes are installed.
Figure 50