background image

4000343/03

Please read this manual before installing and operating this heater.

This manual should remain with the homeowner.

WARNING: If the information in these 

instructions is not followed exactly, a fire 

or explosion may result causing property 

damage, personal injury or loss of life.

WHAT TO DO IF YOU SMELL GAS

• Do not try to light the appliance.

• Do not touch any electrical switch; do not 

use any phone in your building.

• Immediately call your gas supplier from 

a neighbor’s phone. Follow the gas 

supplier’s instructions.

• If you cannot reach your gas supplier, call 

the fire department.

This appliance is a domestic room-heating 

appliance. It must not be used for any other 

purposes such as drying clothes, etc.
This appliance is suitable for installation in a 

bedroom or bed sitting room.

Manufactured by

MILES INDUSTRIES LTD.

British Columbia, Canada

www.milesfireplaces.com

Installation & Operating

Instructions

Do not store or use gasoline or other 

flammable vapours and liquids in the vicinity 

of this or any other appliance.

Installation and service must be performed 

by a qualified installer, service agency or the 

gas supplier.

530 B-VENT

GAS FIREPLACE HEATER

USE THIS MANUAL IN CONJUNCTION WITH THE MANUAL SUPPLIED 

WITH THE 530X ENGINE

Vous pouvez vous procurer un exemplaire français de ce manuel auprès de votre marchand.

Summary of Contents for 530 B-Vent










Reviews: