11. CONVECTION BOX INSTALLATION
26
11.1 Method 1 - Front fixing to fireplace surround.
26
11.2 Method 2 - Cable retention and floor fixing.
26 - 27
11.3 Sealing floor front - Method 1 & 2 inc Frameless
28
12. FITTING THE WALL LINERS & FUEL EFFECT
29
12.1 Fitting the rear wall liner (Vermiculite/Ceramic/Glass)
29
12.2 Fitting the Glass liners spacer support and filler piece.
29
12.3 Fitting the side wall liners (Vermiculite/Ceramic/Glass.
29
12.4 Fitting the log fuel effect
30
13. BURNER AND SUPPLY PIPE INSTALLATION
30
13.1 Burner installation.
30
13.2 Supply pipe installation.
30
13.3 Burner checks.
30
- 13.3.1 Lighting the fire (RC)
30
- 13.3.2 Adjusting flame height (RC)
31
- 13.3.3 Adjusting to pilot only (RC)
31
- 13.3.4 Turing off (RC)
31
- 13.3.5 Lighting the fire (FS)
31
- 13.3.6 Adjusting flame height (FS)
32
- 13.3.7 Turning off (FS)
32
13.4 Check inlet pressure.
32
14. REASSEMBLE OF FIRE
33
14.1 Fitting the bottom tray into convector box
33
14.2 Fitting the top tray into the convector box
33
14.3 Positioning the ember wool accross the burners
33
14.4 Replacing the log fuel effect
34
14.5 Refit the window door panel
34
14.5 Refit the visual baffle
34
15. FULL OPERATING CHECKS
34
15.1 Check the burner operation.
34
15.2 Check for spillage.
34
15.3 Flame supervision and spillage monitoring system.
35
16. TRIM OR FRAMELESS INSTALLATION
36
17. FINAL REVIEW
37
©
GDC Group Ltd. SEPT 2016
Page 6
Continued on next page
CONTENTS (Continued)
Section
Page