5
Steel Framing Kit
Installation
10. Remove four top stand-
o
ff
s from
fi
replace and
discard.
11. Place
fi
replace
on top of bottom
section but do not
place against wall.
12. Stop and
fi
nish electrical and gas installation
while
you have room (see “Electrical Wiring” and “Gas Sup-
ply” in the LX1 Installer’s Manual).
13. Once complete,
place
fi
replace
fully against the
wall (stando
ff
s
between studs).
14. Flatten front
feet of
fi
replace
down and screw
feet to the bot-
tom section with
self-drilling sheet
metal screws (max
1” length).
15. Place shims on top
of the
fi
replace,
avoiding plac-
ing the shims on
screw heads (min
1/4”). Place middle
section on top
of
fi
replace with
fl
anges around the
wall studs.
16. Screw the middle
section in line to
the wall, through
the studs, to pull
the middle section
snug against the
studs.
X
X
X
X