46
WARNING
CHOKING HAZARD!
Ensure that the
fi
replace
area is clear of
fi
re glass particles as these could
be ingested by small children. Vacuum area after
installation.
!
Murano Glass Fire Installation
4. Mix the black and blue
fi
re glass together.
5. Fill a small container with approximately 3 cups
(750 ml) of mixed
fi
re glass.
6. Carefully spread the
fi
reglass on the surface of
burner patting it gently with your hand to form a
single layer to the approximate level of the top edge
of the
fl
ange around the burner. Do not pour too
much to avoid blocking the burner ports.
7. Some
fi
reglass may be added on the platform to
cover the edge of the burner and in the space in
front and behind the pilot shield.
NOTE:
Ensure the area
within
the pilot shield is
clear of
fi
reglass.
Installed platform
Installed glass plates
Gap behind burner
No gap in front of burner
Top view—platform
2. Install the sheet metal platform on top of the
brackets as indicated. The edge of the burner
protrudes above the platform. Push the platform as
far back as possible to maximize the air gap behind
the burner.
3. Install the glass plates on the platform, the textured
side underneath and the smooth side on top. Follow
the diagram below as the pieces are not all the
same size. Ensure each piece is up against an end
stop.
Pilot shield
end stops
platform
glass plates
narrower glass plates at the back
wider glass plates at the front
Top view—glass plates
longer glass plates
in the middle
pilot area
narrower
wider
QUALIFIED
INSTALLER
