2
Rear view of
spacers
Front view
shows clips
Installation of glass panels
1.
Inside the fi rebox, on the top of each side, release
the screw of the side panel anchors if necessary so
they can rotate freely (one per side).
2.
Fit two rear spacers on the top edge of the rear
glass panel orienting the spacer as shown.
3.
Fit two side spacers at the bottom of the rear
panel orienting the clip on the front of the panel as
shown.
4.
Place the rear glass panel, smooth side visible, up
against the rear of the fi rebox.
5.
Fit one spacer on the angled part of the left hand
side panel towards the rear and one spacer at the
top on the square part of the panel.
6.
Fit two spacers at the bottom
of the left hand side panel
orienting the clip on the front
of the panel as shown.
7.
Rotate the left anchor up and out of the way and
slide the side panel against the fi rebox left side.
Rotate the anchor back down to hold the panel.
8.
Tighten the side panel anchor.
Rear glass panel
smooth side visible
Left side glass panel
smooth side
visible
