5
5. Install the top panel as indicated (4 x 1/2" screws).
6. Ensure the appliance is snug against the framing
and secure it to the studs on each side (4
fi
points per side). Use wood screws (not supplied with
this kit).
7. Set aside the side doors, removable panel and bar-
rier screen to install later when the appliance’s set-
up and wall
fi
nish application are completed.
8. Continue the installation of the appliance.
Finish kit installation
Once the appliance installation and wall
fi
nish is
completed,
fi
nish the installation of the kit.
1. Slide the removable panel at the bottom of the
fi
replace into the clips on the horizontal supports on
each side; the panel covers the valve and goes
under the
fi
rebox. Push the panel in until fully
inserted into the clips.
2. Identify the left hand door from the right using
diagram below.
Left Side Door
Right Side Door
Tab at the bottom