2
Installation of glass panels
Please note that it is not necessary to remove the
burner to install the glass panels.
1.
Inside the fi rebox, on the top of each side, release
the screw of the side brick anchors (one per side)
to allow them to rotate.
2.
Sandwich the left side glass panel (smooth side
out) against one of the side ceramic fi ller panel and
hold them together using two clips at the bottom
edge. Repeat for the right side glass panel. Set the
side panels assemblies aside.
3.
Place the rear ceramic fi ller panel on the railing at
the back of the fi rebox and add the glass panel,
smooth side out, in front of the ceramic panel. Both
panels should be retained at the bottom by the
fl ange of the railing. Hold the panels in place.
4.
Install either the left or the right side glass and fi ller
panels assembly against the fi rebox side and slide
it back against the rear panels.
5.
Rotate the side anchor over the top edge to hold
the panels ensuring the panels are tight together.
Tighten the anchor screw.
6.
Repeat with the other side panels assembly.
7.
Place the ceramic top panel so it rests on the rear
and side panels.
Glass panel
Ceramic
infi ll panel