2
Installation
1. On completion of fi replace installation, install the
“V” shaped convection baffl e to the top of the
appliance as shown (3 screws).
2. Install the door catch bracket to the bottom of
the backing plate (2 screws). You can add some
washers (supplied) to shim the door catch if it is too
low and the door is too easy to open.
3. Carefully position and secure backing plate with 4
low profi le screws to 4 fi rebox mounting brackets.
Before tightening, push the plate against the wall
fi nish then tighten.
4. Slide the removable panel in the clip on the hori-
zontal supports on each side and push it in until
fl ush with the backing plate.
5. Adjust the position of the convection brackets on
each side of the window. Release the nut, pull the
bracket as forward as possible and tighten the nut.
