4004403-06
1149 Edgemont Double Doors
Use with
Valor 1100 & 1150 Models only
The 1149 Edgemont Double Doors are intended to be
used on Valor heaters models 1100 & 1150. Mounting
of the 1149 does not aff ect framing clearances or other
specifi cations listed in the heater installation manuals—
see installation manual supplied with the heater for
more information.
© Copyright Miles Industries Ltd., 2018
41-7/8” (1063 mm)
34-1/4”
(870 mm)
27-3/4”
(706 mm)
33-5/8” (855 mm)
2-3/8” (61 mm)
from convection
baffle to top of
backing plate
1100 or 1150 engine
1149 Edgemont
Double Doors
Base of appliance fl ush with hearth surface
Overview
HOT GLASS
WILL
CAUSE BURNS.
DO NOT TOUCH
GLASS
UNTIL COOLED.
NEVER
ALLOW CHILDREN
TO TOUCH GLASS.
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
Note:
Mounting of this trim allows for non-combustible
material up to 3/4” (19 mm) thick installed over top of
the required 1/2” (13 mm) cement board. For thicker
fi nishes, refer to appliance manual.
INSTALLATION MANUAL
H5 Series
INSTALLER
Leave this manual
with the appliance.
CONSUMER
Retain this manual
for future reference.
