2
Installation
1. On completion of fi replace installation, fi t the con-
vection baffl e to top face of fi rebox with 3 screws.
2. Carefully position and secure backing plate with 4
low profi le screws to 4 fi rebox mounting brackets;
before tightening, hold plate up against wall fi nish
then tighten.
3. Slide the removable panel in the clip on the
horizontal supports on each side and push it in until
fl ush with the front trim.
4. Adjust the position of the convection brackets on
each side of the window. Release the nut, pull the
bracket as forward as possible and tighten the nut.
5. Identify left hand door from right using diagram
below.
LH Door
RH Door
finger grip inboard,
with locator on right
finger grip inboard,
with locator on left
Bottom of
locator tabs
have hook
