4004430-05
1135TSBE Three Sided Trim with Edgemont Front
Use with
Valor 1100 & 1150 Models only
The 1135TSBE trim is intended to be used on Valor heaters models 1100 & 1150. Mounting of the 1135TSBE does
not aff ect clearances or other specifi cations listed in the appliance installation manuals—see installation manual
supplied with the appliance for more information.
Note:
Mounting of this trim allows for non-combustible
material up to 3/4” (19 mm) thick installed over top of the
required 1/2” (13 mm) cement board. For thicker fi nishes,
refer to appliance manual.
Overview
1100 or 1150 engine
© Copyright Miles Industries Ltd., 2018
41-7/8” (1063 mm)
31-7/8”
(811 mm)
Backing plate
assembly
RH door
LH door
Removable panel
Convection baffl e
Edgemont barrier screen
HOT GLASS
WILL
CAUSE BURNS.
DO NOT TOUCH
GLASS
UNTIL COOLED.
NEVER
ALLOW CHILDREN
TO TOUCH GLASS.
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
INSTALLATION MANUAL
H5 Series
INSTALLER
Leave this manual
with the appliance.
CONSUMER
Retain this manual
for future reference.
