Valmar 2055, Operator'S Manual

Page: 48 / 78

VALMAR Assembly & Options
Page 41
8 - Options
Valmar
Airflo makes available optional
equipment designed to fit your applicator to
particular
applications or enhance its
performance. This section provides basic
information about the function of each option as
well as reasons for using them. Detailed
instructions for the assembly and installation of
the options are contained in the kits themselves.
Pedestal Mount Kit (18.6251)
A pedestal mount kit is available for situations
where the applicator may need to be installed
over an obstruction on your implement such as
depth control linkage. A welder is required for
assembly.
Alternate Rate Kit (18.6384)
An alternate rate kit is available for operators
who need to switch between two different
application rates on the go. Operators can
decrease application rates on hilltops or
increase them in heavily infested areas.
Gas Engine Kit (18.6346)
A gas engine kit is available for operators who
need a fan that is driven by a gas engine, such
as in situations where tractor hydraulic flow may
be insufficient for a hydraulically driven fan.
Note: A gas engine is not provided in this kit. A
9
horsepower engine (11.3898) is
recommended for the 2055, and an 11
horsepower engine (11.3899) is recommended
for the 2455 and 3255.
Flow Control Bypass Kits
These kits are recommended for operators who
experience surging and/or heating problems
with their hydraulic fan drive. Two kits are
available:
18.7102 - For tractors with closed center or
open center hydraulic systems with an
adjustable flow controller.
18.7276 - For tractors with non-adjustable flow
controllers.
Hose Coupler Kit (18.7156)
This kit is for operators who may wish to
temporarily remove their applicator from the
implement. The coupler eliminates the need to
pull the delivery hoses off the venturis.
Outlet Blocker Kit
This kit allows the operator to block off from one
to 10 outlets on the metering bottoms.
Harrowbar Mounting Kits
A variety of harrowbar mounting kits are
available from Valmar. See your dealer to
determine which one is right for you.