Distance from the lower surface of
the grease filter to an electric
cooker at least 500 mm and at
least 650 mm to a gas cooker.
Vallox Slim-Line
PTXPA MC COOKER HOOD
The cooker hood is fastened with the fastening supplies in the package.
1. Fasten the fastening brackets on the back edge and sides of the cooker hood to the
hood (Figure 1).
2. Lift the cooker hood in place and fasten the fastening brackets on the back edge to
the wall (Figure 2). The fastening screws in the accessory bag are suitable for
wooden, chipboard, concrete and masonry walls. When fastening on other surfaces,
use appropriate fixing accessories.
3. Fasten the fastening bracket on the side to the cupboard (Figure 3).
4. Connect the hood to the extract air ductwork of the ventilation system by using
a ø 125 mm spiral duct. Ensure that the connection is tight.
Make sure that the ductwork is fire resistant (Finnish Building Regulations E7).
The cooker hood must not be connected to a flue which is used for extracting
combustion gases from appliances running on other sources of energy than
electricity.
The regulations by authorities covering how extract air must be conducted have
to be taken into account.
A sufficient supply of fresh air into a room has to be arranged if the cooker hood
and a fire place, for instance, are used simultaneously.
NOTE!
Fastening
1
2
3
MOUNTING INSTRUCTIONS
© VALLOX • We reserve the right to make changes without prior notice
2
min. 500 mm
or
min. 650 mm
Electrical connection
Electrical connections must only be performed by an authorised person.
LED
COOKER HOOD
10 A
Vallox SC or MC ventilation unit
Note! There is no led connector
in SC units
DISTRIBUTION
PANEL
3 x 1.5 S
S
+
L
L
N
-
4 x 0.5 S
10V DC
