Valley Sportsman 8725657, Manual

Page: 15 / 35

16
The fence (CC) and pusher (DD) have predetermined spaces for
attachment to the table. The fence attaches to the side, the pusher
attaches to the end. Using socket screws, attach the fence and pusher to
their respective areas. (Figure 16)
Assembling the Fence and Pusher
Meat Cutting
WARNING
If machine has overloaded or blocked, disconnect the overload protection switch a
nd press the reset button after 100 seconds,at this moment, open the overload prot
ection switch, then press the green start button, machine starts work normally .
WARNING