VALLEY FORGE & BOLT SPC4 406A, User Manual

Page: 13 / 24

VALLEY FORGE & BOLT MANUFACTURING COMPANY PHONE: (602) 269 - 5748
4410 W. Jefferson St. • Phoenix, AZ 85043 • USA WEB: www.vfbolts.com
SPC4™ SYSTEM • MODEL 406A • USER’S MANUAL Rev. 1.0
- Page 11 of 21 -
1.3.8 AA Batteries (AA)
Figure 6 – Battery (BAT)
The AA batteries (see
Figure 6 – Battery (BAT)
) are
located inside of the 406A unit. They are D6 sized Alkaline
batteries with a nominal voltage of 1.5V each.
See
2.2.0 406A Battery Replacement on how to
properly install or remove a 406A battery.
Battery life can be extended by using good practices such
as turning off the Bluetooth when not in use.
We recommend using non-rechargeable AA Lithium
batteries to further extend the battery life of the 406A.
1.3.9 Helper Tool (HT)
Figure 7 - Helper Tool (HT)
The supplied battery helper tool (see
Figure 7 - Helper
Tool (HT)
) is to be used while installing or removing the
406A batteries.
This tool is very effective at assisting in the installation
process of the batteries as it guides the and prevents
damage to the batteries.
The HT should also be used in removing the batteries as
a leverage tool to free the batteries from the contacts.