47
46
USING THE DEVICE
USING THE DEVICE
Adjustment of treatment settings
You can adjust the device’s treatment and voice settings via the online MyValkee
user interface (http://www.valkee.com/myvalkee/). The instructions for the
interface can be found at the same address.
First, register as a user of the MyValkee interface. When you log in for the first
time, the interface installs the software required on your computer. The installation
is safe. Your firewall program may ask separately about permission to perform the
installation.
Cleaning
Clean the earplugs after each use. Remove the silicone parts, and clean them
carefully with a damp cloth or soft paper.
Handle the optical fibers with care – they are easily damaged.
Removing the device from use
Do not dispose of the device with household waste. The device and its lithium-
ion battery must be recycled, or otherwise disposed of, in compliance with the
regulations in force.
Do not open the device or disconnect the battery. If the battery comes loose or
is removed, it must not be opened, taken apart, or modified. If the battery leaks,
avoid skin or eye contact with the electrolyte. If contact nonetheless occurs,
immediately rinse your skin and eyes with water and contact a doctor.
Do not use a damaged battery. Keep the device and the battery out of the reach of
children. Keep the device away from open flames – the battery could explode.
Fault situations
In the event of a fault, the orange and green indicator lights flash simultaneously
and the device beeps several times or does not switch on at all.
In the event of a fault, reset the device by pressing the power button and holding
it for approximately 30 seconds. If required, contact the manufacturer. The contact
information can be found on the back cover of the user manual.
