manualshive.com logo in svg

Valgrind Software, Quick Start Manual

Get started with Valgrind Software effortlessly using our Quick Start Manual. This comprehensive manual is available for free download at manualshive.com, providing step-by-step instructions and valuable tips to optimize your experience with our exceptional software. Get the most out of Valgrind with our user-friendly manual today!

Share
Download
background image

README.android

# Then cd to the root of your Valgrind source tree.
#
cd /path/to/valgrind/source/tree

# After this point, you don’t need to modify anything; just copy and
# paste the commands below.

# Set up toolchain paths.
#
# For ARM
export AR=$NDKROOT/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-ar
export LD=$NDKROOT/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-ld
export CC=$NDKROOT/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-gcc

# For x86
export AR=$NDKROOT/toolchains/x86-4.4.3/prebuilt/linux-x86/bin/i686-android-linux-ar
export LD=$NDKROOT/toolchains/x86-4.4.3/prebuilt/linux-x86/bin/i686-android-linux-ld
export CC=$NDKROOT/toolchains/x86-4.4.3/prebuilt/linux-x86/bin/i686-android-linux-gcc

# Do configuration stuff.

Don’t mess with the --prefix in the

# configure command below, even if you think it’s wrong.
# You may need to set the --with-tmpdir path to something
# different if /sdcard doesn’t work on the device -- this is
# a known cause of difficulties.

./autogen.sh

# for ARM
CPPFLAGS="--sysroot=$NDKROOT/platforms/android-3/arch-arm -DANDROID_HARDWARE_$HWKIND" \

CFLAGS="--sysroot=$NDKROOT/platforms/android-3/arch-arm" \
./configure --prefix=/data/local/Inst \
--host=armv7-unknown-linux --target=armv7-unknown-linux \
--with-tmpdir=/sdcard

# note: on android emulator, android-14 platform was also tested and works.
# It is not clear what this platform nr really is.

# for x86
CPPFLAGS="--sysroot=$NDKROOT/platforms/android-9/arch-x86 -DANDROID_HARDWARE_$HWKIND" \

CFLAGS="--sysroot=$NDKROOT/platforms/android-9/arch-x86 -fno-pic" \
./configure --prefix=/data/local/Inst \
--host=i686-android-linux --target=i686-android-linux \
--with-tmpdir=/sdcard

# At the end of the configure run, a few lines of details
# are printed.

Make sure that you see these two lines:

#
# For ARM:
#

Platform variant: android

#

Primary -DVGPV string: -DVGPV_arm_linux_android=1

#

90

Summary of Contents for Software
































































































































































































































































































































Reviews:

No comments

Related manuals for Software

F-SECURE PSB Getting Started Manual preview
PSB
Brand: F-SECURE Pages: 18
Yamaha S08 Voice Editor Manual preview
S08 Voice Editor
Brand: Yamaha Pages: 26
Yamaha MOTIF RACK Music System Owner'S Manual preview
MOTIF RACK Music System
Brand: Yamaha Pages: 37
Yamaha TOOLS for MY16-mLAN Installation Manual preview
TOOLS for MY16-mLAN
Brand: Yamaha Pages: 50
Waves Linear-Phase MultiBand Software Audio Processor User Manual preview
Linear-Phase MultiBand Software Audio Processor
Brand: Waves Pages: 27
Omron FLEXXPECT Brochure preview
FLEXXPECT
Brand: Omron Pages: 4
Cabletron Systems Element Manager 2.1 User Manual preview
Element Manager 2.1
Brand: Cabletron Systems Pages: 108
Philips SpeechExec Dictation Recorder 1.6.0.0 User Manual preview
SpeechExec Dictation Recorder 1.6.0.0
Brand: Philips Pages: 42
Philips RWDV1610B/00 User Manual preview
RWDV1610B/00
Brand: Philips Pages: 56
Philips SPEECHEXEC 4.3 Quick Reference Manual preview
SPEECHEXEC 4.3
Brand: Philips Pages: 184
Siemens OC130S Installation Instructions Manual preview
OC130S
Brand: Siemens Pages: 11
Siemens ID Mouse V 3.1 User Manual preview
ID Mouse V 3.1
Brand: Siemens Pages: 28
Siemens ROS User Manual preview
ROS
Brand: Siemens Pages: 32
Siemens OpenScape Xpressions PhoneMail User Manual preview
OpenScape Xpressions PhoneMail
Brand: Siemens Pages: 110
Linux LINUX ENTERPRISE DESKTOP 10 SP1 - Manual preview
LINUX ENTERPRISE DESKTOP 10 SP1 -
Brand: Linux Pages: 76
Red Hat ENTERPRISE 5.4 RELEASE NOTES Manual preview
ENTERPRISE 5.4 RELEASE NOTES
Brand: Red Hat Pages: 466
Extron electronics MS9200P User Manual preview
MS9200P
Brand: Extron electronics Pages: 124
Adaptec CDP-00278-02-A User Manual preview
CDP-00278-02-A
Brand: Adaptec Pages: 133

Brands by name

Popular brands

Load more brands