Valex 1959904, Instruction Manual And Safety Instructions

Page: 5 / 6

- 5 -
g
Thank you for choosing our product.
!
WARNING! Before installing this tool, make sure you
read and follow the safety regulations and instructions
set out below. Carefully keep this instruction handbook
in a safe and handy place so that you can consult it
when needed.
DESCRIPTION
Refer to fig. A:
1 Plug
2 Socket
3 Timer
4 Current time indicator
5 Selector switch
6 Operation indicator light (where fitted)
7 On/Timer switch (where fitted))
DESCRIPTION OF MARKS AND SYMBOLS
WARNING!
Read the instructions carefully before use.
Indoor use only. Do not expose this appliance to
rain or moisture.
Electric and electronic waste may contain poten-
tially hazardous substances for the environment
and human health. It should therefore not be di-
sposed of with domestic waste, but by means of
differentiated collection at specific centres or returned
to the vendor in the event of purchasing new equipment
of the same type. The illegal disposal of waste will result
in administrative sanctions.
Programmed operation
Always on operation
V Volt
Hz Hertz
W Watt
A Ampere
~ Alternating current
‘ minutes
SAFETY WARNINGS
WARNING! Read all the warnings and instructions.
Failure to comply with the warnings and instructions
may cause electric shock and/or personal injury.
Store all warnings and instructions for future reference.
1) WARNING! The manufacturer is not liable for any
direct and/or indirect damage caused by incorrect
installations.
2) Follow the instructions for assembly given in this
manual.
3) Regularly check the conditions of the device.
4) Do not wet the device for any reason.
5) Do not touch with bare or wet feet/hands.
6) Keep children and animals away from devices con-
nected to the power supply.
7) The power supply voltage must match that indicated
on the technical data nameplate. Do not use any other
type of power supply.
8) Observe the maximum current and power value appli-
cable to the device.
9) A cut-out box on the electrical power supply line is
mandatory. Consult your local electrician.
10) The device must be connected to the earth cable of
the building’s electrical system.
11) Do not place power adapters between the wall socket
and the socket timer.
12) Never connect potentially dangerous devices, such as:
electric heaters, electric ovens, power tools, electric
toys for children, medical devices for personal health,
safety equipment, fans, i.e. all those devices that must
be monitored when in operation.
13) Do not use the device if damaged.
INSTALLATION AND OPERATION
!
Warning! Using outdoors, in damp environments, in
the bathroom is prohibited.
Avoid installing in vehicle and foot traffic areas, places
where children are present, areas where unauthorised
persons have access.
Keep a safe distance from water, such as taps, bathtubs,
sinks, showers, fish tanks, humidifiers.
1) Programme the operation period by operating the
levers (pos. 5) placed around the timer, e.g. 8:30/20:45
(24 hour clock)
raised position = switched off
lowered position = switched on
2) Rotate the timer dial (pos. 3) respecting the direction
of rotation (see arrow) and set the current time, e.g. 7:15.
Refer to the fixed indicator (pos. 4).
3) Connect the device to the wall socket in the room,
making sure that the timer is on the top, and the socket
(pos. 2) is on the bottom.
4) Select the operation type (pos. 7): programmed or
always switched on.