Ÿ
Brightness: For adjusting screen brightness
Ÿ
Display Time: The time GP-200 needs to enter sleep
mode.
Ÿ
Language: For choosing your system language.
Brightness
50
Display
Time
Always
Language
English
EXP 2/ Footswitch
Display
Global EQ
Factory Reset
Auto CAB Match
About
GLOBAL SETTING
ON/OFF
ON
EXP 2/ Footswitch
Display
Global EQ
Factory Reset
Auto CAB Match
About
GLOBAL SETTING
Press
PARA
to
enter
.
EXP 2/ Footswitch
Display
Global EQ
Factory Reset
Auto CAB Match
About
GLOBAL SETTING
Global EQ
Band 4 Freq
Band 4 Q
Band 4 Gain
Parameter
Range
Description
ON/OFF
ON/OFF
On/O global EQ
Level
0~100(Default:
50)
Adjust the master volume of the global equalizer
Low Cut
OFF~20Hz~20000Hz
(Default: OFF)
High pass filter to cut o low frequency signals.
Band 1-4: 4 selectable
peak filters used for
overall or detailed
frequency adjustment in
the certain range,
including 3 available
parameters: Frequency,
Q and Gain.
Band 1-4
Frequency
20Hz~20000Hz
(Band 1-4’s default frequencies
are accordingly 100Hz, 500Hz,
1000Hz and 5000Hz)
To adjust the corresponding filter’s frequency.
Band 1-4 Q
0.1~10.0
(Default: 0.71)
Width. To adjust the width of the formant (slope of the
filter), the larger the number, the steeper the slope.
Band 1-4
Gain
-20dB ~ +20dB
(Default: 0dB)
Adjust the filter gain
High Cut
20Hz
~
20000Hz~OFF
(Default: 20000Hz)
Low pass filter to cut o high frequency signals.
14
Display
This menu is to adjust parameters and settings of the
displayed factors.
Auto CAB Match
This is to turn on/o the correlation status of the AMP
module and the CAB module.
Ÿ
When turned ON, the e ects in the CAB module will
correspondingly change with the e ects in the AMP
module.
Global EQ
This menu is to control the global equalizer of the GP-200 in order to change the overall tone feel.
This is the displayed menu:
Global EQ contains Low Cut / High Cut, and 4 bands of parametric EQ. Every frequency band can be freely turned
on/o based on your needs. There are total 8 of them.
Global Settings
