background image

Important Safety InStruCtIonS

valet vacuum Owners manual

intended only for Household and light commercial use

Before InStallatIon or operatIon:

• Read the supplied manual and ensure correct installation and use of the product/s
• Empty the dust container regularly
• Check the condition of the filter cartridge regularly
• Do not install outside unless proper weather protection is in place
• Do not connect to a non grounded supply or a non approved supply 
• Do not service the Power Unit unless it has been disconnected from the supply
• Do not use with a damaged electrical lead or plug
• Keep electrical lead away from heated or sharp objects
• Keep inflammable objects or liquids away from the Power Unit
• Do not place or store anything on top of the Power Unit
• Do not place or store anything that may restrict the air flow of the Power Unit
• Do not vent the Power Unit into a wall, a ceiling, or any enclosed space
• Do not vacuum any wet surfaces
• Do not vacuum any liquids, including any fuels
• Do not vacuum anything that is hot, burning or smoking
• Do not vacuum any ash, even it appears dormant
• Avoid vacuuming plaster dust or talcum powder, which can cause clogging of the filter 

cartridge

• Do not obstruct, block or impede the hose or wall valve inlets
• Keep hair, all parts of the body and loose clothing away from the hose or wall inlets
• Do not use non recommended attachments or accessories
• Pay close attention to children while the system is being used
• Do not allow children to use the system as a toy

WarnIng

Improper uSe may CauSe fIre,  

eleCtrIC ShoCk or Injury 

valet v81 & v110 power units are designed to power central vacuum systems for 
residential buildings. 
the power unit is connected to the ducted piping serving the various rooms. inlet 
valves are installed in rooms in the house for plugging the vacuum hose and 
various cleaning accessories.
the vacuum unit has been designed to remove dust and small solid material and 

must not be used to vacuum liquids or hazardous materials.

4

Summary of Contents for V110

















Reviews: