Проверил: Р.Ч./12.07.2016г.
The appliance didn’t heat up,
only ventilator worked
The switch was not put at
heating setting
Turn the switch to heat setting
The thermostat operated
Turn the thermostat and listen if there
is open/close voice. If there is no
click and the thermostat is not
damaged, the heater will automatic
switch on when the appliance cooled
down.
The Non-self resetting cut-out
operated
Disconnect the power, held the stick
and insert it in the reset hole on the
control panel, press down the reset
button and connect the circuit.
Abnormal noise
The appliance is not stands
upright
Put the heater on a level surface
Disposal
Environmental Protection
Waste electrical production should not be disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or retailer for recycling advice.
