VALERII S&M GROUP PREMIUM 0503RH32K1200J, Original Instruction Manual

Page: 6 / 19

Проверил: Р.Ч./.05.2017г.
regular basis.
* Remove the carbon brush holders (9)
and clean the carbon brushes at the same
time.
* In case of wear, replace both carbon
brushes at the same time.
* Mount the carbon brush holder.
* After mounting new carbon brushes, let
the machine run at no load for 15 minutes.
Use only the correct type of carbon
brushes.
Lubrication (fig. A)
After approximately 50 hours the machine
must be lubricated.
* Open the cover of the lubrication point
(8) using the supplied key.
* Apply an appropriate amount of grease
to the mechanism.
* Close the cover.
CLEANING AND MAINTENANCE
The machine does not require any special
maintenance.
*Regularly clean the ventilation slots.
TECHNICAL DATA
Mains voltage 230V
Mains frequency 50Hz
Power input 1200W
Speed (under load) r/min 800
No. of strokes, under load min 4300
Drilling capacity in
steel mm 13
wood mm 40
Impact strength J 5.5
Weight kg 5.5
Level of sound pressure measured
(sound pressure)LPA:(K=3Db(A)96.4
Dd(A)
(acoustic power) LWA(K=3db(A)
107.4dB(A)
Take appropriate measures for the
protection of hearing.
Weighted root mean square acceleration
value according to EN 50144:
GUARANTEE
Refer to the enclosed
guarantee conditions for the
terms and conditions of
guarantee.
ENVIRONMENT
Should your machine need replacement
after extended use, do not put it in the
domestic waste but dispose of it in an
environmentally safe way.