VALERII S&M GROUP HTL09A, Original User Manual

Page: 6 / 18

Проверил: Р.Ч./19.03.2015г
Do not leave it outside overnight. Do not cut damp or wet grass.

The power supply cable should be checked regularly. Before each use, make sure cable is not damaged
or worn. If the cable is not in good condition, do not use the trimmer. Take it to an authorized service
center for proper repair.

Only use an extension cord which is suitable for out door work. Keep it away from the cutting area, damp,
wet or oily surfaces, or sharp edges. Keep away from heat and fuels.

Avoid unintentional
starting. Don’t carry plugged in hedge trimmer with fingers on both switches. Be sure
switch is off when plugging in.

Do not attempt to remove cut material or hold material to be cut when blades are moving. Make sure
trimmer switch is off when clearing jammed material from blades. Do not grasp the exposed cutting
blades or cutting edges when picking up or holding the hedge trimmer.
CAUTION : Blades coast after turn off.
 Don’t force hedge trimmer, it will do the job better and with less likelihood of risk of injury at the rate for
which it was designed.

Stay alert, watch what you are doing. Use common sense. Do not operate hedge trimmer when you are
tired.

Maintain hedge trimmer with care, keep cutting blades sharp and clean for best performance and to
reduce the risk of injury. Inspect extension cord periodically and replace if damaged. Keep handles dry,
clean and free from oil and grease.

Use of a residual current device with a tripping current of 30 mA or less is required for machines for
outdoor use.
KNOW YOUR PRODUCT
( Fig.1)
1 Safety blade cover
2 Blade
3 Safety protection cover
4 Front handle with on/off switch
5 Rear handle with on/off switch
6 Cable holder
7 Cable and plug
8 Fix guard screw
SPECIFICATIONS
Model HTLD09A-14x410;HTLD09A-14x450;
HTLD09A-14x510; HTLD09A-14x550
Rated power: 450W
Rated input 230-240V~, 50Hz