Valeport rapid ProSVT, Operating Manual, Page: 32 / 36

© 2019 Valeport Ltd
0660907a - rapidPro Operating Manual
Page 32
5. Bluetooth Adapter - Re-Program and Pair
Complete the following steps:
·
Install the Bluetooth Configurator utility (vpBluetoothSetup.exe)
·
Ensure that the SWiFT USB cable is disconnected
·
Ensure the SWiFT is turned on
·
Plug USB Bluetooth adapter into the PC and note the Com port number
·
Select the Com port the USB Bluetooth adapter is configured as
§ In order to do this go to the Windows Control Panel > Device Manager > Ports (COM & LPT)
if the Com port is not obvious, unplug the cable or Bluetooth adapter, the Com will disappear and reappear
when the adapter is plugged back in.
·
Select the instrument type:
- SWiFT: SWiFT SVP and SWiFTplus
- Rapid: original Rapid, pre 2018
- Rapid Logger (Bluetooth LE Mode): ProLogger Module (rapidPro SVT, CTD and CTDplus) - Factory Default.
- Rapid Logger (Classic Mode): ProLogger Module (rapidPro SVT, CTD and CTDplus).
·
Select
Re-program
if your Bluetooth module is not in the mode required - Classic or LE.
·
Select
Just Pair
if your Bluetooth module is in the correct mode and you simply need to pair with your
instrument.
Click
Next >
The status LED on the USB Bluetooth module will change colour a number of times while it is being configured