fastCTD and fastCTD plus : MANUAL-2034990662-4 | issue: 1.0
Page | 15
©
2021
– Valeport Ltd
Command
Notes
Pn.nn
Performs profile at a depth increment of n.nn, as set by the operator, in the
current profiling units (see command #018). e.g.: P0.25 takes a reading
every 0.25 dBar, metres or feet as appropriate
Rapid Profile Settings
#812;NN.N
Start Depth (Logging on)
#813
Report Start Depth
#814;NN.N
Stop Step (Logging off when depth decreases by amount. Should signify
bottom of profile.)
#815
Report Stop Step
Bluetooth Power Saving Mode
#820;0
Bluetooth Power Saving mode off
#820;1
Bluetooth Power Saving mode on
#824;NN.N
Bluetooth off Depth
#825
Report Bluetooth Off Depth
#822;NN.N
Bluetooth on Depth
#823
Report Bluetooth On Depth
Fluorometer Power Saving
#434;0
Fluorometer Power Saving mode off
#434;1
Fluorometer Power Saving mode on
#436;NN.N
Fluorometer off depth
Pressure Units
#018;0
Pressure is output in dBar
#018;1
Pressure is output in metres, calculated using simplified UNESCO formula
#018;2
Pressure is output in feet, calculated using simplified UNESCO formula
Pressure Tare
#009;
Takes a single reading of the pressure sensor and uses the measured value
as a Tare (note the ‘;’ in the command)
#009;nn
Sets the Pressure Tare to ‘nn’, a user specified value (entered in the chosen
units as set with command #018)
e.g: #009;10.3 sets Pressure Tare to 10.3 dBar metres or feet.
#010
Instrument responds with current Tare value
