DataLog x2 and Terminal x2 Installation and User Guide
MANUAL-1899207337-17
Page | 5
©
2021
– Valeport Ltd
3 Terminal X2
Terminal x2 is a lightweight terminal program for serial communication, configuration and control of
Valeport Instruments. It is intended as a direct replacement for Hyper Terminal which is no longer
available for Windows PC's.
It has a number of additional features over and above most terminal packages including data
logging, wizard based instrument configuration, file downloads, multiple port connections and TCP-
IP serial connection for use over internet connections.
3.1 Terminal Toolbar
This allows the port to be configured, serial com ports or TCP/IP ports can be selected. Baud rates
can be changed whilst still connected. Default port settings are 8 bit, No stop bit, No 1 Parity Bit.
These settings can be changed but as standard will work with all Valeport instruments.
Other options available from this toolbar include echo on/off, wrapping, hexadecimal split screen,
hide/show special characters and time stamping.
